SERIBOND-FILLEX is two component cross linking bonding system which provide excellent dry strength resin for paper Industry. It is most suitable product for
short fiber pulp like Bagasse, Straw, Waste paper, Bamboo, hard wood etc. It also improves strength properties like burst factor, stiffness, breaking length, RCT, ply bonding, tear factor of Kraft, Duplex Board and writing and printing paper, SERIBOND FILLEX gives better sheet formation and also increase machine run ability. It improves retention of fillers & fines and eliminate press picking problem of paper.

Specification: Part A || Part B
Appearance: Hazy to clear liquid || Clear viscously
Solid: 14 ± 1 || 14 ± 1
PH Value: 5.1 ± 0.1 || 4 ± 1
Ionic nature: Cationic || Mildly cationic
Composition: Bond system  || Hardener
Solubility: Easily soluble || Easily soluble
Shelf Life: 180 days || 180 days

Application
SERIBOND FILLEX can be used in all kinds of writing & printing paper, duplex boards, Kraft paper ect. It may be used after addition of resin and best addition point is mixing chest.

The recommended dosage of SERIBOND FILLEX is 0.20% to 0.60% on dry paper basis to get the desired result.

Packing: 200 Kgs Carboys and 200 Kgs. Drums

Storage & Handling: Storage must be in covered place. Carboys should be kept tightly closed when not in use.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.
Disclaimer: The information in this document is given to the best of Serix’s knowledge, based on laboratory testing and practical experience. Serix’s product are considered as semi-finished goods and as such products are often used under conditions beyond Serix’s control. Serix cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Serix reserves the right to change the given data without further notice. Users should always consult Serix for specific guidance on the general suitability of this product for their needs and specific application practices