SERIBOND-ANTIFORM-E is a revolutionary antifoam formulation dedicated for paper making. It is a very effective defoamer and paper stock deaerator. It is
suitable for multiple applications such as waste water treatment, oil drilling etc It is recommended to treat aqueous foam problems.

Aqueous emulsion of organic hydroxy compounds, fatty acid esters and surfactants. APEO free.

Benifis
1) SERIBOND-ANTIFORM-E is very persistent and shows excellent performance in the control of foams by significantly reducing the entrained air content.
2) It is does not affect sizing or paper strength.
3) It is very effective even at low concentrations and facilitates smoother pump operation, transport.
4) Leaves no residues in the pipes or valves of the equipment used

Specification
Appearance: Milky flowable emulsion
Solid: 29 %
Specific gravity at 25 ºC approx. 1.00 g/cm3
Shelf Life: 180 days.

Application
SERIBOND-ANTIFORM-E Apply the product in its natural state by aspersion or by dosing pump and adjust the initial dosage according to the requirements.
SERIBOND-ANTIFORM-E may also be distributed with a water dilution system and or with a special metering system for automatic dosing, which means
product will automatically added only when needed.

Packing:200 Kgs Carboys and 200 Kgs. Drums

Storage & Handling
Stir well before use.
Store at room temperature in original closed containers.
The minimum shelf life in closed containers is 12 months from the date of manufacture.
Mix product and retest for quality after one year from the date of manufacture.
Storage must be in covered place. Carboys should be kept tightly closed when not in use.

Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult Material Safety Data Sheets and follow all local or national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take precautions against possible risks of fire or explosions as well as protection of the environment. Apply only in well ventilated areas.
Disclaimer: The information in this document is given to the best of Serix’s knowledge, based on laboratory testing and practical experience. Serix’s product are considered as semi-finished goods and as such products are often used under conditions beyond Serix’s control. Serix cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Serix reserves the right to change the given data without further notice. Users should always consult Serix for specific guidance on the general suitability of this product for their needs and specific application practices